Application

Application of communication and artificial intelligence industry

Communication server

    Hooray fan has tailored fans with high air volume, high wind pressure, high IP protection, energy saving and control technologies for the communication and artificial intelligence industries, which are applied to various Netcom products. Hooray fan provides superior cooling solutions, ubiquitous cooling system, and 5g intelligent life, which is more convenient.

    Communication Series:

        38*38*20, 38*38*28, 40*40*28 (Turbo), 40*40*56,

        60*60*25, 60*60*38, 60*60*76, 80*80*25, 80*80*38,

        92*92*25, 92*92*38, 120*120*25, 120*120*38,

        172*150*50.8, 200*200*70, 300*300*180

        12V~48V

    Server Series:

        38*38*20, 38*38*28, 40*40*28 (Turbo), 40*40*56,

        60*60*38, 80*80*38, 92*92*38

        12V~48V

    As we all know, when the server is running, it will emit a lot of heat because of the long-term power operation. If we don't use heat dissipation means, it will cause the server to overheat and burn some important wires, resulting in a sudden short circuit of the server. When it comes to cooling means, the most economical and practical one is the cooling fan. How does the cooling fan help the server to cool down? In fact, it is through the rotation of the cooling fan to blow out the heat energy that cannot be normally discharged from the inside of the server. Let me introduce some key points when selecting the cooling fan of the server.

1. Speed
    The performance of the fan depends on whether the speed is fast enough. If the speed is not enough, the air volume and pressure will be reduced accordingly, and the wind can not reach the target point, resulting in the heat energy can not be discharged.

2. Air volume

    The air volume is mostly determined by the internal space of the server. If the internal space of the server is large, the cooling fan with enough air volume must be selected. Otherwise, it is just like the air conditioner blowing your head, not your feet, but your head and feet are hot (funny).

3. Wind pressure

    The importance of wind pressure, I believe that those who know about the cooling fan know that the level of wind pressure will directly determine the speed of heat discharge, especially the server has a lot of high impedance parts will change the direction of wind.

4. Power consumption

    As we all know, servers are maintained only once a few years, so the service life of cooling fans must be long, which can reduce labor and maintenance costs. The length of service life has a lot to do with power consumption. The longer the power consumption is, the shorter the service life of bearings will be, which will greatly reduce the service life of cooling fans.

    Therefore, the better the power consumption at the end of the month under the condition of meeting the cooling requirements, There is no need to blindly pursue heat dissipation performance.

5. Noise

    When the cooling fan rotates at a high speed, it will make some wind cutting noise, which we call noise. Most of the cooling fans with strong performance will make a lot of noise, which is inevitable. However, the server's best choice is the cooling fan with medium performance, which can not only avoid excessive performance, but also reduce power consumption and noise.